Spot Sensors and Cable Type Sensors
Indoor Diesel Fuel Detector
- Use on concrete floor or in drip pan
- Instant response to diesel fuel, jet fuel, gasoline
- Resettable
- Tool free, replaceable sensor element for quick restoration of service
Rapid Detection for non-volatile oils
- Detects: Mineral Oil (transformer oil) , Hydraulic Oil, Lube Oil and others
- Ignores water
- Tool free, replaceable sensor element for quick service restoration
Water and Coolant Sensor for Indoor Applications
- Use to detect leaking water of water/glycol coolant
- Compliment to TRM-DFS fuel and IOS oil sensors
- Instant reset when lifted from spill
Water and Coolant Sensor for Indoor Applications
- Use to detect leaking water of water/glycol coolant
- Compliment to TRM-DFS fuel and IOS oil sensors
- Instant reset when lifted from spill
Water detection and locating cable for steam conduit and other high temperature environments.
Outdoor Sump Sensors / Double Wall Tank and Pipe Sensors / Acid, Caustic and Brine Sensors
Fuel / Crude Oil Sensor for Wet or Dry Sumps and Containment Area
- Use outdoor containments or vaults
- Responds to fuels, crude oil, gas condensates
- 3 sizes; 9″ (225 mm), 35″ (890 mm) and 59″ (1500 mm)
- Ignores rain, snow melt, condensation
- Replaceable Core
Combination Fuel/Water for Double Wall Tanks and Pipe
- Use to monitor the interstitial space of double wall tanks and low points in double wall pipe systems
- Detects presence of diesel, gasoline, or jet fuel
- Detects ground water intrusion
Hazardous Fluid Sensors
- Ignore Rain Water and Snow Melt
- Detect highly conductive fluids such as brine, acids, caustic process waste
- Model for sumps, vaults, and buried flange monitoring
Monitoring Devices
cULus approved monitoring device for all TRM sensors
- Monitor up to 20 TRM-DFS-3 indoor diesel sensors; 2 TRM-IOS, 10 TRM-WLS or 2 TRM-UST or 2 TRM-CC
- Relay outputs to connect to BMS, alarm panels or similar site wide monitoring
- Direct control of optional alarm annunciator for facility office or security desk.
cUlus approved monitoring device for all TRM sensors
- Status screen display for instant alarm diagnosis
- Same monitoring capabilities as TRM-Easy5-Relay-U
- Relay outputs to connect to BMS, alarm panels or similar site wide monitoring
- Can directly control alarm annunciator for facility office or security desk.
UL508A Certified Panel with choice of TRM-Easy5-Relay-U or TRM-Relay-SDR controller
- Ready to bolt on the wall
- Includes line voltage (100 Vac to 240 Vac) power supply
- All internal wiring
- Terminal blocks for sensors, relays, remote alarm, line voltage
Remote Alarm or Free Standing Controller for TRM-ALOS or TRM-DFS-3 systems
Mount in security station of facility office or along side Easy 5 panel
Loud buzzer, red LED lighted pushbutton. Push button to silence buzzer but red LED stays on until leak is cleared.
As remote alarm, power and control come from monitoring panel.
As free standing controller power comes from plug-in adapter or from 12 /24 Vdc supply
2 x SPDT (Form-C) alarm output relays